All about Stirrup Bending Machine

The term "ring forming machine" can also refer to the stirrup bending machine. It has several applications in the construction and building industries. Although a stirrup-making machine is similar to a bar bending machine, it offers a few more features that the latter lacks. Using a stirrup bender, bar, rebar, reinforcing bar, and steel can be bent into many shapes, such as triangles, quadrilaterals, pentagons, polygons, and rings.

The MSS Stirrup Bending Machine in Action

Bars can be bent into various configurations using a stirrup bending machine, including simple geometric designs like rectangles and squares. MSS engineering stirrup bender can shape steel rods between 4mm and 32mm in diameter. The processing range and external adjuster are customisable, making this machine very flexible.

Instructions for using the MssStirrup Bending Machine and stirrup-making machine safely and effectively.

• First, ensure the mechanical performance is satisfactory by checking the level of the worktable and the table of the bending machine.

• The hoop machine's core shaft, forming shaft, iron blocking shaft, or variable blocking frame is set up in a certain way depending on the diameter of the steel bar being worked on.

• The mandrel, stopper, and turntable on a steel bending hoop machine are inspected for damage or cracks, the protective cover is securely fastened, and the machine is run while empty to ensure normal performance.

• To use, just fit the steel bar's curved end into the opening on the turntable and press the other end firmly against the airplane's fuselage. Before beginning, double-check the fuselage's fasteners to verify they are securely fastened on the side that will obstruct the steel bar.

• It is forbidden to replace the mandrel, change the angle, modify the speed, or perform other maintenance on the Stirrup Bending Machine while it is in operation.

• The diameter, quantity, and bending speed of steel bars that violate mechanical criteria are severely prohibited.

• If you want to bend bars made of high-hardness or low-alloy steel, you'll need to replace the mandrel in your Stirrup Bending Machine and adjust the standard-restricted diameter so that it works with the machine's nameplate.

• The sides of the Stirrup Bending Machine where the bending steel bar and the fuselage are not fastened are off-limits to users. The hooks on the bent semi-finished products should be facing down when stacked.

• For the turntable to make a U-turn, it must be stopped first.

• The steel hoop bending machine has been shut down, the work area has been cleaned, the equipment has been serviced, and the lockbox has been disabled